AMPLIFICADOR / REPETIDOR RURAL 2 BANDAS 3G + 4G

Repetidor RF doble banda: Todo OPERADOR CELULAR (CLARO MOVISTAR ENTEL)

20W/43 dBm hasta 10 kilometros

Ampliamente utilizado en el área sin señal celular, área de carga de alto tráfico

admite modo de trabajo múltiple: GSM / EDGE y WCDMA/CDMA/LTE

Estructura del módulo, altamente confiable y fácil de actualizar y mantener. Con una disipación de  calor espontánea y segura

                                   Specificaciones Mecanicas y Fuente de Alimentation
Power Supply AC: 100VAC to 240VAC, 50/60Hz
Dimension, Weight 490*410*210, ≤25 kg
Max. Power Consumption ≤350W
Temperature  Humidity -25 to +55℃, ≤95%
Environmental Class IP65
RF Connector Donor port:1, service port:1; N-Female, 50ohm
MTBF ≥100000 hours
Monitor Interface Local Monitor:RJ-45, Remote Monitor: Modem
                                                   Electronic Specifications
                     Item                                   Specification
           Downlink                  Uplink
Output Power (Max)      43±2dBm/Band       27±2dBm/Band
Gain (Max.)            95±3 dB             90±3 dB
NF ≤5 dB at max gain.
Max. input without damage -10 dBm
Gain Adjustable Range/Step ≥30 dB/1dB
Gain Adjustable Error Gain ajustable range is 0~20 dB, error≤1dB; ≥21 dB, error≤1.5d
ALC When adding ≤10dB at max. Output level, output variation ≤±2 dB, when adding >10dB, output variation ≤±2 dB or be off
VSWR ≤1.5
Time Delay ≤5μs
Inter-modulation ≤-40dBc(GSM)
EVM ≤8%(UMTS)
≤6%(LTE)
PCDE ≤-35 dB(UMTS)
Restraint out of the band 3MHz≤ f_offset<5 M  ≥40dB
5 MHz ≤f_offset ≥60dB
Frequency Error ≤0.01ppm
Spurious Emission 9kHz-1GHz: ≤-36dBm, 1GHz-12.75GHz: ≤-30d

Repetidor RF doble banda : 850Mhz y 1900Mhz 43dBm (20W)
Ampliamente utilizado en el área sin señal celular, área de carga de alto tráfico
Banda 850MHz: admite modo de trabajo múltiple: GSM / EDGE y WCDMA;
Banda 1900MHz: Soporte CDMA y LTE.
Estructura del módulo, altamente confiable y fácil de actualizar y mantener. Con una disipación de calor espontánea y segura.

850M &1900M Dual Band Selective RF Repeater, 43dBm/Band

The 850M/1900M dual band Selective RF repeater can enhance the coverage area in the wireless network.

It is widely used in the blind area, high traffic load area and the pilot pollution area, etc… Main Features:

  • 850MHz band: support multi working mode: GSM/EDGE and WCDMA;1900MHz: support CDMA and LTE.
  • Module structure, high reliable and easy to upgrade and
  • With a spontaneous heat
  • Local and remote monitoring/Control functionality with access to the
Power Supply and Mechanical Specifications
Power Supply AC: 100V
AC to 240V
AC, 50/60Hz
Dimension, Weight 490*410*210, ≤25kg
Consumo eléctrico ≤350W
Temperatura trabajo -25 to +55℃, ≤95%
Environmental Class IP65
RF Connector Donor port:1, service port:1; N-Female, 50ohm
MTBF ≥100000 hours
Monitor Interface Local Monitor:RJ-45, Remote Monitor: Modem
 

Item

Specification
Downlink Uplink
Frequency
Range
850M 869 – 894MHz 824 – 849 MHz
1900M 1930 – 1990MHz 1850 – 1910MHz
 

Bandwidth

GSM900 Customize by user
UMTS2100 Customize by user
Potencia (max.)  

43±2dBm/Band

 

27±2dBm/Band

Gain (Max.) 95±3 dB 90±3 dB
NF ≤5 dB at max. gain
Max. input without damage -10 dBm
Gain Adjustable

Range/Step

 

≥30 dB/1dB

Gain Adjustable Error Gain adjustable range is 0~20 dB, error≤1dB; ≥21 dB, error≤1.5 dB
 

ALC

When adding ≤10dB at max. Output level, output variation ≤±2 dB,

when adding >10dB, output variation ≤±2 dB or be off.

 

Ripple in band

≤4dB(850MHz)

≤6dB(1900MHz)

VSWR ≤1.5
Time Delay ≤5μs
Inter-modulation ≤-40dBc(GSM)
 

EVM

≤8%(UMTS)
≤6%(LTE)
PCDE ≤-35 dB(UMTS)
 

Restraint out of the band

3MHz≤ f_offset<5 MHz                      ≥40dB
5 MHz ≤f_offset                                       ≥60dB
Frequency Error ≤0.01ppm
Spurious Emission 9kHz-1GHz: ≤-36dBm, 1GHz-12.75GHz: ≤-30dBm
Schematic Diagram
Machine Drawing